A Styrofoam cylinder, filled with water, sits on a table. You then poke a small hole through the side of the cylinder, 20 cm below the top of the water surface. What is the speed of the fluid emerging from the hole?

Water is flowing in a fire hose with a velocity of 1.0 m/s and a pressure of 200000 Pa. At the nozzle the pressure decreases to atmospheric pressure (101300 Pa), there is no change in height. Use the Bernoulli equation to calculate the velocity of the water exiting the nozzle.

Dynamic similarity exist when the model and prototype have the same ____

Model and prototype should be similar in

Which are the fundamental units?

Reynolds number is the ratio of __

The Difference between the height of EGL and HGL is equal to___

Pitote tube is measure

The sum of static and dynamic pressure is called as

Orifice meter is used for__________ 

What is relation between exit velocity (V2) and height (h) for Nozzle?

Select incorrect statement about Bernoulli's equation

for derivation of Bernoulli equation, fluid flow should be 

Write Bernouliis equation for blood flowing in human veins

In fluid body motion, the rate of increase of pressure is

For Neutral equilibrium, metacentric height is

What is Archimedes principle?

The line of action of the buoyant force on the object is called

Depth of centre of pressure is independent of density of the fluid. the statement is

Guage pressure can be

Pressure varies in stationary fluid is

For rigid body motion, shear stress is to be

Surface tension force is because of 

Viscosity for the gases is

Specific gravity of water is

The continuum hypothesis does not valid for

In the range of cruising speed from 180 to 350 m.p.h., Which engine performs better?

------must be provided for an aircrafted to remain in level unaccelerate flight